1 V20200504A
Vehicle Antenna Installation
1.
Before installation, make sure that the glass surface is spotlessly clean and dry
，
wipe
the area of the windscreen where you are attaching the antenna to.
2.
If the glass is cold, you may need to warm up the glass first to ensure good adhesion.
3.
Vehicle antenna should be fitted onto the windscreen on the side of the passenger seat.
To optimize reception, put the signal amplifier (the black plastic case) and the
aerial wires 3 to 5cm away from the side of the windscreen and 2 to 3cm from the top.
(Refer to diagram 1)
4.
Ensure the glass surface is dry before mounting the antenna film. Remove the
adhesive backing and stick the lower horizontal section of the antenna film to the
windscreen. Be careful not to touch the sticky side of the antenna film. (Refer to
diagram 2).
5.
Stick the antenna to the glass, gently applying pressure to remove any air bubbles.
(Refer to diagram 2).
6.
Remove the adhesive backing from the amplifier block on the antenna lead, ensuring
that you do not touch the terminals or the sticky surface.
DAB Antenna ANT-001
ANT-001
Antenna Film
Amplifier Block
SMB convertor plug
Antenna Lead
Earth Sheet
