Timex Ironman Global Trainer M229 Скачать руководство пользователя страница 29

Страница: 29 / 42

LOW

Enter the minimum heart rate threshold. If your heart rate goes below this

threshold, the alert sounds. Press

to close the setting change window. The range

is 30 to 240.

HIGH

Enter the maximum heart rate threshold. If your heart rate goes above this

threshold, the alert sounds. Press

to close the setting change window. The range

is 30 to 240.

NOTE:

If the Low value is set above the High value, the High value is automatically set to 5 beats higher than

the Low value. If the High value is set below the Low value, the Low value is automatically set to 5 beats lower

than the High value. If either value is set outside the acceptable range, the previous settings are retained.

Cadence Zone

Setting Group

Adjustment

CADENCE ZONE

Select ON to alert you when your bike crank rpm is outside the Below or Above

settings, or OFF to disable the cadence zone alert.

BELOW

Enter the minimum rpm threshold. If you go below this cadence, the alert sounds.

Press

to close the setting change window. The range is 0 to 200.

ABOVE

Enter the maximum rpm threshold. If you go above this cadence, the alert

sounds. Press

to close the setting change window. The range is 0 to 200.

Power Zone

Setting Group

Adjustment

POWER ZONE

Select ON to alert you when generating fewer or more watts than the Below or

Above settings, or OFF to disable the power zone alert.

BELOW

Enter the minimum power threshold. If you generate less power than this, the

alert sounds. Press

to close the setting change window. The range is 0 to 999.

ABOVE

Enter the maximum power threshold. If you generate more power than this, the

alert sounds. Press

to close the setting change window. The range is 0 to 999.

Sensors

Use the Sensors menu to search for, pair, and manage ANT+

™

sensor devices such as heart rate monitors,

cadence and speed sensors, and power meters.

Configure Sensor Settings

1. Press MODE until CONFIGURE displays.
2. Press

to highlight SENSORS, then press

3. Press



to highlight the setting to change, then press

to open the setting change window.

4. Press



to highlight a selection in the setting change window, then press

to confirm your

Содержание Ironman Global Trainer M229











































Результаты поиска

Содержание Ironman Global Trainer M229

Отзывы:

Похожие инструкции для Ironman Global Trainer M229

Бренды по названию

Популярные бренды

Timex Ironman Global Trainer M229, Руководство пользователя

Результаты поиска

Содержание Ironman Global Trainer M229

Отзывы:

Похожие инструкции для Ironman Global Trainer M229

Бренды по названию

Популярные бренды