Timex IRONMAN Classic 50 Move+, Инструкция по эксплуатации

Страница: 9 / 460

TIMEX
®
IRONMAN
®
Classic 50 Move+ Owner’s Manual Page 8
INDIGLO® NIGHT-LIGHT
Electroluminescent technology used in the INDIGLO night-light illuminates the entire watch face for easy
viewing at night and in low light conditions.
Push the INDIGLO button to illuminate watch display for 3-4 seconds when the watch is not in the
Setting state, or 6-7 seconds otherwise.
NIGHT-MODE® FEATURE
The NIGHT-MODE feature causes any button press to automatically activate the INDIGLO night-light for
3-4 seconds when the watch is not in the Settings state, or 6-7 seconds otherwise. When the NIGHT-
MODE feature is active, you will see a moon icon on the display.
Push and hold the INDIGLO button for 4 seconds to activate or deactivate the NIGHT-MODE feature.
NOTE: NIGHT-MODE will automatically deactivate after 8 hours.
VIEWING THE ACTIVITY TRACKER DATA
1. From the Time of Day screen, push the Stop/Reset button to scroll through the available activity
tracking data (STEPS, # of steps taken, DIST, total distance covered, CALS, number of calories
burned, DATE, Day of week and date).
NOTE: Your TIMEX IRONMAN Classic 50 Move+ will automatically reset the activity data (set all fields to
zero) at midnight each night.
CHRONOGRAPH
Use the Chronograph mode to record a workout. Chronograph mode counts up by hundredths of a
second up to one hour, then by seconds up to 100 hours. The Stopwatch icon will be flashing on the
display during a workout and will be solid when the workout is paused or stopped. Chrono will continue
running even if you exit Chrono mode.
To set the display format, push the Set/Recall button. Push the Start/Split button to change the format
then push the Set/Recall button to exit back to Chrono mode.
1. From the Time of Day screen, push the Mode button until you see CHRONO.
2. Push the Start/Split button to start the workout.
3. To take a split, push the Start/Split button. Lap and split times will be displayed with the lap
number.
4. Repeatedly pushing the Set/Recall button during the workout will display the following data (lap
timer, steps, distance and calorie expenditure) on the top banner.
5. To stop or pause the workout, push the Stop/Reset button.
6. To resume the workout, push the Start/Split button.
7. After completing the workout, push the Stop/Reset button to stop the workout.
8. To save the Chrono workout, push and hold the Set/Recall button for two seconds.
9. To discard the Chrono workout, push and hold the Stop/Reset button for two seconds.