51
50
For Timer Mode, you can set the following values:
➤
Time (hours, minutes, seconds for up to 99 hours, 59 minutes,
and 59 seconds)
➤
End action (STOP, REPEAT, or CHRONO)
Operating the timer
1. Press
START/SPLIT
to start the timer countdown.
2. Pause the countdown by pressing
STOP/RESET.
You may resume
the countdown by pressing
START/SPLIT
again, or reset the timer
by pressing and holding
STOP/RESET.
3. When the timer reaches zero, a brief alert sounds.
4. The timer will stop after the alert if set to
STOP
OR
the timer will begin another countdown if set to
REPEAT
and
continue until you press
STOP/RESET.
The lower line of the display will show RPT and a number (for
example, RPT 2). RPT indicates the timer is repeating and
the number indicates how many times the timer has cycled
through the repeat countdown. You will also see the repeat
icon, indicating the timer is set to repeat.
OR
The timer will switch to Chronograph, Vertical, or Finish Mode if set
to one of those modes. You will see the switch mode
icon, indicating the timer will switch modes at the end
of the countdown.
Basic Timer Mode
Basic Timer Mode allows you to set a fixed time from which the
Watch counts down to zero (for example, 10, 9, 8, …). You can set
the timer to stop, repeat or switch to Chronograph, Vertical, or
Finish Mode after the countdown.
Setting the timer
1. Press
MODE
until Basic Timer Mode appears.
2. Press and hold the
SET
button until the word SET briefly appears on
the display, followed by a flashing value.
3. Set the first value by pr
(DISPLAY)
or –
(STOP/RESET)
.
4. Press
SELECT (SET/FORMAT)
to move to the next value to set.
5. Repeat steps 3 and 4 for all the values that need adjustment.
6. Press
DONE (MODE)
to save your changes and complete the setting
process.
Set timer
Stop or reset
the timer
INDIGLO®
night-light
Start the
timer
To Alarm
Mode or hold
for time
