Timewave DSP-D300 Скачать руководство пользователя страница 20

Страница: 20 / 112

Field Possible

Values

Description

IPAddress

IP Address

The IP address of the DSP-D300

IPMask

IP Address

The network mask.

Gateway

IP Address

The network gateway.

MACAddress

IP Address

The MAC address for the DSP-D300. It is
recommended that this is NOT changed from
the default. This is also printed on the internal
Ethernet module.

DNSServer

IP Address

The IP address of the primary, secondary, and
tertiary DNS servers.

PacketTimeout 0- 1073741823 seconds

The idle timeout for packets. If no packet is
received within the timeout, a warning alarm is
sent.

PacketTimeoutPort

Any port from 1 to 64000

The port for the Alarm. Standard is 23.

PacketTimeoutAddr IP Address

The destination for the Alarm.

PacketMode

EIF or BDF

The mode the packets are sent to the server.

TelnetServer

URL or IP address

The URL or the IP address of the telnet server
to connect to.

represents the server number

from 0 to 14. Set the URL to “0” to disable
the telnet client connection.

TelnetPort

Any port from 1 to 64000

The port for the Telnet connection. Standard
is 23.

TelnetRetry

1-300

The number of seconds to wait to retry a failed
telnet connection.

TelnetMode

Raw or Standard

The type of telnet connection. Raw just sends
the packets. Standard will implement the
telnet protocol.

NIST host

IP Address

The discovered NIST host. Not user
changeable.

status

status

Description:

Give the system status.

Notes:

There are several parameters for the status:

CPU Temperature

Current board temperature.

Board Voltage

Current board voltage. Should be around 17 VDC.

COM1 I/O

Bytes in and out the primary COM port and Telnet Clients.

COM2 I/O

Bytes in and out the secondary COM port.

Signal Level

The current audio level.

Signal Gain

The current audio gain.

CPU Uptime

How long the main processor has been running.

CPU Status

The CPU status byte in hexadecimal.

Telnet Port

Connection status for Telnet.

Shell Online

Whether the shell is online or not.

Содержание DSP-D300
















































































































Результаты поиска

Содержание DSP-D300

Отзывы:

Бренды по названию

Популярные бренды

Timewave DSP-D300, Руководство пользователя

Результаты поиска

Содержание DSP-D300

Отзывы:

Бренды по названию

Популярные бренды