31
Advanced
This section of the K220 Configuration Utility allows the user to set a number of preferences.
System Information
–
Shows the Serial number of the K 220 and the Operating Firmware
version. Also indicated is the last known Voltage of power supplied to the unit.
Video Standard
– Selects whether the K220 is to be used with PAL or NTSC cameras.
Camera Voltage
– Selects the appropriate camera voltage supplied by the K2 20; OFF, 5V,
9V, 12V.
WARNI NG - Be careful not to exceed the connect
ed camera’s voltage rating as this can
cause permanent damage to the camera.
LEDs
– Disables or enables the K220 LED indicators.
Power Monitoring
–
Set a Voltage level where the K220 will turn the low battery LED on and
when the unit should power off.
Set Password
– A password can be entered in order to prevent unauthorized changes to the
supplied
Camera Voltage
,
Configuration Utility
,
K220 Menu
and
K220 Playback
(playback
here refers to the integral LCD on the K220).
Playback
–
The K220 can output audi o and video through the control connecter e.g. for
playing on an external screen when reviewing footage using the K220.
In addition there are two buttons at the bottom of the Advanced Menu.
Format Di sk
will
completely clear all recordings and menu settings from the K210 the next time it is turned on
(by moving the toggle switch to the ‘On – Recording’ position). The
Delete Recordings
button will remove all recording files from memory but leave the menu settings unchanged.
