timecode systems UltraSync BLUE Скачать руководство пользователя страница 66

Страница: 66 / 118

Timecode Mode

Operation

RF Slave

UltraSync ONE receives its timecode

data from a master Timecode

Systems product*. It can then send

this timecode data to any devices

that are attached via the LTC and

SYNC ports.

EXT LTC Input

UltraSync ONE receives its timecode

data from a device that is connected

via the LTC port.

Free Run/Jam-Ext

UltraSync ONE has its timecode set

by jamming to a signal from a device

that is connected via the LTC port.

Once jammed, the UltraSync ONE

can be disconnected and it will

continue to use the timecode. It

needs to be re-jammed at regular

intervals to remain synchronised.

*When an UltraSync ONE is free running and in RF Slave mode, it uses its own

clock settings but continues to search for a master in the same network. If it

finds a master, the master will set the timecode.

6. Press the

Select

button.

7. If you are prompted to choose an

RF Channel

, use the

and

Down

buttons

to set the RF Channel that the UltraSync ONE will use for radio

communications. The master device can only communicate with slave devices

that use the same RF Channel as the master.

8. If you are prompted to choose

Non-Continuous

Continuous

, select:

Non-Continuous

- If the external device is disconnected from your

UltraSync ONE, the UltraSync ONE will stop.

Continuous

- If the external device is disconnected from your UltraSync

ONE, the UltraSync ONE will free run until the external device is

reconnected.

UltraSync ONE User Guide

Содержание UltraSync BLUE























































































































Результаты поиска

Содержание UltraSync BLUE

Отзывы:

Бренды по названию

Популярные бренды

timecode systems UltraSync BLUE, Руководство пользователя

Результаты поиска

Содержание UltraSync BLUE

Отзывы:

Бренды по названию

Популярные бренды