timecode systems mini basestation Скачать руководство пользователя страница 81

Страница: 81 / 108

Power Saving with Stealth Mode

With

Stealth Mode

, you can set your :pulse to turn wi-fi off automatically if there is

no external power. This is a power saving feature, designed to keep your :pulse on

for as long as possible when it has to use its internal battery (the battery has a

limited amount of charge, and this will be used up more quickly if wi-fi is enabled).

1. Switch on your :pulse unit (see

Switch :pulse On and Off on page 50

2. Press the control knob.

3. Turn the control knob to scroll to the

WiFi Settings

option.

4. Press the control knob.

5. Turn the control knob to scroll to the

Stealth Mode

option.

6. Press the control knob.

7. Turn the control knob to select the appropriate option:

Enable

to turn

Stealth Mode

on. If your :pulse is disconnected from an

external power source, it will turn off wi-fi automatically.

Disable

to turn

Stealth Mode

off. If your :pulse is disconnected from an

external power source, it will not change its wi-fi settings. If your :pulse

has wi-fi on, it will consume battery power more quickly than it would if

Stealth Mode

was enabled or wi-fi was off.

8. Press the control knob to confirm your selection.

:pulse User Guide

Содержание mini basestation













































































































Результаты поиска

Содержание mini basestation

Отзывы:

timecode systems mini basestation, Руководство пользователя, Страница: 81 / 108

Результаты поиска

Содержание mini basestation

Отзывы: