3.1.1 Network
By default the network parameters are setup up using DHCP. In order to set static values, uncheck the
DHCP check box and enter new values in the address fields. If the values aren't changed the current
addresses will be kept.
The TMPC must be restarted for these changes to take affect.
Addresses in
the Network section must be entered in Ipv4, dotted quad, format.
3.1.2 Time Synchronization
NOTE*
If any timezone settings are changed, the changes will not take effect until the next SNTP
Resync Period.
3.1.2.1 SNTP Servers
The first entry (Primary SNTP Server) sets the address of the SNTP server, where where the TMPC
gets its timing information. In case the Primary SNTP Server is unreachable the TMPC will fall to the
Backup SNTP Server. Both DNS names (time.nist.gov) and IPv4 (192.43.244.18) formats are accepted.
3.1.2.2 Time Zone
Selecting the Time Zone sets the offset the clock will display from Greenwich Mean Time. All fields
Installation and Operations Manual | Page 7
Web / timemachinescorp.com Email /
Phone / (402) 486.0511
Illustration 5: Parameters Page (Part 2)
