Timberwolf TW 230HB (Diesel), Инструкция по эксплуатации, Страница: 21 / 62

C190-0302 - Rev 1.0 EN 19/59
3.4 Operating Safely - You MUST
YOU MUST stop the chipper engine before adjusting, refuelling or cleaning.
YOU MUST check the rotor has stopped rotating and remove the chipper ignition key
before maintenance of any kind, or whenever the machine is to be left unattended.
YOU MUST check the machine is well supported, handbrake applied, and cannot move.
Use wheel chocks if available. If working on an incline, position on solid ground, across the
slope.
YOU MUST operate the chipper with the engine set to maximum speed when chipping.
YOU MUST check (visually) for fluid leaks. If found, resolve the leak before operating the
chipper.
YOU MUST take regular breaks. Wearing personal protective equipment for long periods
can be tiring and hot.
YOU MUST keep hands, feet and clothing out of feed opening, discharge and moving
parts.
YOU MUST use the next piece of material or a push stick to push in short pieces. Under no
circumstances should you reach into the funnel.
YOU MUST keep the operating area clear of people and animals.
YOU MUST keep the operating area clear from debris build up.
YOU MUST keep clear of the discharge tube. Material may be ejected with great force.
YOU MUST ensure protective guarding is in place before commencing work. Failure to do
so may result in personal injury or loss of life.
YOU MUST operate the chipper in a well ventilated area - exhaust fumes are dangerous.
YOU MUST ensure a fire extinguisher is available on site.
YOU MUST ensure a personal first aid kit and hand cleaning materials are available (e.g.
waterless skin cleanser).
3.5 Operating Safely - You MUST NOT
YOU MUST NOT operate the chipper if you are under the influence of any substance
(drugs, alcohol) which might impair vision, dexterity or judgement.
YOU MUST NOT operate the chipper unless available light is sufficient to see clearly.
YOU MUST NOT use or attempt to start the chipper without the feed funnel, guards and
discharge unit securely in place.
YOU MUST NOT stand directly in front of the feed funnel when using the chipper. Stand
to one side (Figure 1).
3 Safety Notes and Warnings TW 230HB (Diesel)