Timberk TEC.PF3 LE 2000 IN, Инструкция по эксплуатации

Страница: 4 / 24

www.timberk.com • electric convector heater
4
NOTE:
The manufacturer reserves the right to change the
set-list of the device (including liquid and powder
components) for different supplies without prior
notice. The changes either in no way influence the
basic technical parameters of the device or may
improve them, and also not violate the legislation or
quality standards of the countries of manufacture,
transit and selling.
The changes in the set-list may result in changing
of the weight and dimensions of the device, but not
more than by +\- 5-20% (depending on the product
category).
8. Support legs for the convector to be installed in any convenient place.
9. A built-in carrying handle.
10. A built-in fall sensor will switch off the convector if it is turned away
from a vertical position, for example, if it is accidentally tipped over when
operated on legs (for models TEC. PF3 LE...IN).
Dimensions of convectors depending on power (Fig. 1)
Timberk series convectors are distinguished on maximum consumed
power of the heating element and differ from each other by the unit’s length
at equal height and depth. (Standard overall height of all units is equal to
400 mm). This pattern in forming overall dimensions allows the consumer
to use Timberk convectors of different power in one room next to each
other without breaking regular symmetries, and perfectly integrating several
units into your interior at the same time.
1000 w
460 mm 595 mm 830 mm
400 mm
1500 w 2000 w
Fig. 1
Technical characteristics
Table 1
Model
Power
supply,
V/Hz
Operating power
consumption (on
modes), W
Rated
curren, A
Net weight,
kg
Overall dimensions, mm
TEC.PF3 M 1000 IN 220~/50 400/600/1000 4.5 3.6 460х400х69
TEC. PF3 M 1500 IN 220~/50 500/1000/1500 6.8 4.4 595х400х69
TEC. PF3 M 2000 IN 220~/50 800/1200/2000 9.1 5.6 830х400х69
TEC. PF3 LE 1000 IN 220~/50 400/600/1000 4.5 3.6 460х400х69
TEC. PF3 LE 1500 IN 220~/50 500/1000/1500 6.8 4.4 595х400х69
TEC. PF3 LE 2000 IN 220~/50 800/1200/2000 9.1 5.6 830х400х69
For a detailed description of technical parameters and characteristics go to
www.timberk.com or contact TIMBERK official dealers.
1. Control panel
2. Outlet grill louver
3. Unit’s case (front part)
4. Cold air inlet
5. Support legs
Fig. 2
4. DESCRIPTION OF THE CONVECTOR
1
4
5
2
3