Timberk TEC.E3 M 1000, Инструкция по эксплуатации

Страница: 8 / 20

www.timberk.com • electric convector heater
8
11. UTILIZATION
Upon end of its life convector heater should be utilized in accordance with
rules and regulations and in ways effective in the place of utilization. For
details concerning utilization of your convector heater, please, contact local
authorities.
12. CIRCUIT SCHEMATICS
Models TEC.E3 M, TEC.E5 M
Fig. 8
Possible malfunctions and remedies for them:
If you are not able to remedy a malfunction according to the
recommendations or other malfunctions occur, contact the authorized
service center of Timberk.
9. TROUBLESHOOTING
Malfunction Cause Remedy
1. The heater heats poorly
1. The heating element is faulty
1. Contact the authorized service center
of Timberk
2. Low voltage in the electric mains 2. Check voltage in the electric mains
2. The heater does not work
1. No voltage in the electric mains
1. Check presence of voltage in the
electric mains
2. Breakdown of the electric cable
2. Check integrity of the electric cable and
replace it if necessary
3. The automatic circuit breaker of the
electric mains is faulty
3. Check operability of the automatic circuit
breaker of the electric mains and replace
the faulty circuit breaker if necessary
4. Breakdown in the heating element circuit
4. Contact the authorized service center
of Timberk
10. TRANSPORTATIOM AND STORAGE
Temperature
requirements*
Humidity
requirements*
We are exploring new technologies and we constantly improving the quality
of our products. That’s why specifications, design and accessories are
subject to change without any specific notice.
* This product must have storage in dry, well-ventilated space of warehouse at the temperature
not lower than -30°
Transportation and
storage
From -30° to +50°
From 15% to 85%
(without a condensate)