WLCT04
SINGLE CHANNEL WIRELESS LENS CONTROL
NUCLEUS
Use the included M6 screw to attach the plate to the handle
of the Gravity G2X and the Ronin-S’s M4 screw to attach it
to the handle of the Ronin-S
Loosen the hand-tightened screw of the Handwheel Attachment Plate
Adapter for Zhiyun Crane, then clamp it around the handle of the gimbal.
Tighten the hand-tightened screw to secure the adapter. Then use the
included M6 screw to attach the Handwheel Attachment Plate.
TILTA GRAVITY G2X and DJI RONIN-S
ZHIYUN CRANE
Attaching the Nucleus-Nano
Handwheel Attachment Plate
2
5
Mount the camera with the
attached motor onto your gimbal body
Use a 1/4”-20 screw to attach the gimbal’s baseplate to the
15mm Single Rod Mounting Baseplate.
4
1
2
3
4
Nucleus-Nano Motor x1
Nucleus-Nano Handwheel Controller x1
15mm Single Rod Mounting Baseplate x1
15mm x 100mm Aluminum Black Rod x1
Photo Lens Follow Focus Gear Ring x 2
Handwheel Attachment Plate for G2X and Ronin-S x1
Handwheel Attachment Adapter for Zhiyun Crane x1
Micro USB to Micro USB Nano Motor Power Cable x1
14500 Dual Battery Charger x1
14500 Batteries x2
M4 Allen Key x1
M6 Allen Key x1
User Guide x1
Cardboard Box x1
Packing List：
1
2
2.1
3
3.1
Use 1/4”-20 screw to mount the baseplate to the camera body
Inser t the rod into the 15mm Single Rod Mounting Baseplate
Loosen the motor ’s hand-tightened screw and attach the motor
to the rod. Rotate the motor so that it rests against the lens’ focus
gear, then tighten the screw.
*Example Shown with
Tilta Gravity G2X
1
5
2
3
4
Attaching the Motor
1
