Operation - 15
GENERAL OPERATION
Handlebar Adjustment
The Power Ox 240B has a height adjustable handle-
bar to increase operator control and comfort. The
following steps describe how to adjust the handle-
bars.
1. Loosen the handlebar adjustment knobs (A).
2.
A
A
Support the handle bars.
3. Lift one side of the locking mechanism (B)
ensure the mechanism is not engaged and
tighten the adjustment knob.
4.
B
B
Lift the other side locking mechanism and lower
the handle bars to the lowest position.
5. Loosen the adjustment knob.
6. Standing in the operators position, lift the han-
dlebars to the desired location. The mechanism
will engage holding the handlebars in position.
7. Ensure the locking mechanisms are fully
engaged and tighten the adjustment knobs.
Track Width Adjustment
The wheels can be adjusted to three different loca
-
tions (Narrow, Mid, Wide), in four inch increments to
accommodate different row spacing. Wheel spacing
dimensions are located in the specification section
of this manual.
1.
CAUTION
Ensure that the Power Ox 240B is securely sup-
ported. Failure to properly support the unit could
result in damage to equipment or injury.
Support the unit with jack stands, ensure that
the wheels are off of the ground.
2. Remove the left and right axle covers by remov-
ing the eight 5/16” mounting bolts (A).
3.
A
A
A
A
A
A
A
A
Remove the belt and pulley cover by loosening
three 5/16” bolts (B).
B
B
B
B
GENERAL OPERATION
