TIGIEFFE Airo V Series, Руководство по эксплуатации и обслуживанию

Страница: 6 / 103

Use and Maintenance Manual - Series V8 E V10 E Page 6
1. INTRODUCTION
This Use and Maintenance Manual provides general instructions concerning the complete range of machines indicated on the cover.
Therefore, the description of their components, as well as control and safety systems, may include parts not present on Your machine
since supplied on request or not available. In order to keep pace with the technical development AIRO-Tigieffe s.r.l. reserves the right
to modify the product and/or the use and maintenance manual at any time without updating the units already delivered.
1.1. Legal aspects
1.1.1.
Delivery of the machine
Within EU (European Union) member countries the machine is delivered complete with:
▪ Use and Maintenance manual in your language
▪ CE mark applied on the machine
▪
CE conformity declaration
▪
Guarantee certificate
▪
Declaration of internal testing
Only for Italy:
▪
Instructions on commissioning declaration with INAIL and on the application for the first periodic check on the INAIL portal.
It is to be noted that the Use and Maintenance Manual is an integral part of the machine and a copy of this, together with copies of
the documents certifying that the periodical checks have been carried out, must be kept on board in its suitable container. In the
event of a transfer of ownership the machine must always be provided with its use and maintenance manual.
1.1.2.
Declaration of commissioning, first check, further periodical checks and transfers of ownership
The legal obligations of the owner of the machine vary according to the country of commissioning. It is therefore recommended to
inquiry about the procedures in force in your country from the boards responsible for industrial safety. This manual contains a final
section called "Check register" for a better filing of documents and recording of any modifications.
1.1.2.1.
Declaration of commissioning and first check
In ITALY the owner of the Aerial Platform must notify the use of the machine to the local competent INAIL and submit it to periodical
compulsory checks. The first of such checks is performed by the INAIL within sixty days from a request being made. In the event of
such time passing without the inspection being made, the employer can call in the ASL (Local Health Unit) or qualified public or
private services. Subsequent checks are made by the already-mentioned parties within thirty days from a request being made. In
the event of such time passing without these checks being made, the employer can call in qualified public or private services. The
checks are on a payment basis and the employer (machine owner) will be charged for them. For these checks, the territorial inspection
boards (ASL/USL or ARPA) and INAIL can be supported by qualified public or private services. The qualified private institutes acquire
the qualification of responsible for the public service and refer directly to the public structure that controls this function.
For the commissioning declaration in Italy it is necessary to login to the INAIL portal. Follow the instructions delivered together with
other documents during the machine delivery, as well as the information about the portal.
The INAIL will assign a serial number when the First Check is performed before completing the “technical identification sheet” on
which it indicates only the details obtained from the already-operating machine or obtainable from the instruction manual. Such
document shall form an integral part of the machine documentation.