TIGIEFFE Airo V Series, Руководство по эксплуатации и обслуживанию

Страница: 10 / 103

Use and Maintenance Manual - Series V8 E V10 E Page 10
1.7. Machine life, demolition and decommissioning
The machine has been designed to last for 10 years in normal operating environments, if properly used and serviced. Within this
period, the manufacturer must carry out a complete inspection/overhaul.
If disposal of the unit is necessary, comply with current local regulations.
In Italy, the demolition/decommissioning must be notified to the local ASL / USL or ARPA.
The machine consists mainly of metal parts which are easy to be identified (steel for the most parts, and aluminium for the hydraulic
blocks); thus, we can state that the machine can be recycled at 90%.
European standards and those transposed by the member countries relating to respect for the environment
and the disposal of wastes envisage heavy administrative and penal fines in case of infringement.
In case of demolition/decommissioning, carefully keep to the provisions of applicable regulations, especially
as regards materials such as hydraulic oil and batteries.
1.8. Identification
In order to identify the machine, when spare parts and service are required, always mention the information given in the serial number
plate. Should this plate (as well as the various stickers applied on the machine) be lost or illegible, it is to be replaced as soon as
possible. In order to identify the machine when no plate is available the serial number is also stamped on the chassis. To locate the
plate and the stamp of the serial number, see the following picture. It is recommended to copy such data in the following boxes.
MODEL: _________________ CHASSIS: __________________ YEAR: __________________
Fig.1