TIGIEFFE AIRO R Series, Руководство по эксплуатации и обслуживанию

Страница: 70 / 114

Use and Maintenance Manual - R13 R17 Series Page 70
7.2.7. Tracks condition and tension check
The life of the rubber tracks depends on the ground on which the machine is used. The tracks must be replaced when the tread ribs
reach a height lower or equal to 10-12 mm, or if evident cuts and/or tears are visible.
For a longer life of the tracks, check their tensioning at least once a month. To check the tracks tensioning:

lift the chassis from the ground using the stabilization control;

visually check the clearance of the tracks;

in case of extremely high clearance, tension the tracks by pumping lubricating grease (type ESSO BEACON EP2 or
equivalent) in the special valve ( A ) which can be accessed through slot ( B ) using a pneumatic pumping system.
Fig. 30
AS THIS OPERATION IS VERY IMPORTANT IT IS TO BE CARRIED OUT BY SKILLED TECHNICIANS ONLY
B
A