TigerStop TigerRack, Руководство по установке

Страница: 25 / 36

25
Increment
The increment function is a push feed mode used to step TigerRack through a series of movements.
Increment...
• Can be a positive value that will move TigerRack towards the tool.
• Can be a negative value that will move TigerRack away from he tool.
• Will compensate for kerf automatically using the ‘Kerf’ setting in the ‘Setup’ menu.
• Can only store one increment value at a time.
1. Start at the Ready Screen.
2. Press the [Show] soft key to display more options.
3. A new set of options have appeared. Press the [Incr] soft key to
access the Increment menu.
4. Enter the size you want to increment and press [=].
For this example, I am going to use an increment of 2 inches.
5. The current position is 42. If that is where you want to start, press
[Start] to begin incrementing. If you need to move TigerRack to load
your stock, enter the position and press [Start]. TigerRack will move
to position. Load your stock and press [Start] to begin incrementing.
6. When you are finished, press [Stop] to return to the Ready
Screen.
PreSet
The PreSet function is a set of 100 programmable hot keys used to quickly access common lengths.
PreSets...
• Can be used in Set Point, Pusher or Increment mode.
• Can be programed in PreSet slots number 1 - 100.
Note: PreSet functionality can be changed using the ‘PreSet’ setting in the Part List menu.
PreSet Programming
1. From the Ready Screen, press the [Show] soft key to show the menu
options.
2. A new set of soft key options have appeared. Press the [PrSet] soft
key to access the PreSet feature.