Edition
Manual
Chapter
Page
2008-10-17 Workshop Manual, Stiga Titan 5 Mechanical power transmissions
1
5 Mechanical power transmissions
Contents in this chapter
General
The mechanical power transmission consists of all parts involved to transmit the motor
power to the respective consumer item. These are as follows:
• The hydraulic pumps drive at all machines.
• The articulation point pulley at machines with belt driven PTO.
This chapter describes the mechanical power transmissions. It also describes the
replacement procedures of belts, clutch and bearings. There are no adjustment procedures
involved in this system. All adjustments are performed automatic with spring loaded
tension arms.
5.4 Hydraulic pumps belts,
26H, 26HS ...................................8
5.4.1 Description .............................8
5.4.2 Disassembly ...........................8
5.4.3 Inspections .............................10
5.4.4 Assembly................................10
5.5 PTO pulley with bearing,
20B, 26B .....................................11
5.5.1 Description .............................11
5.5.2 Disassembly ...........................11
5.5.3 Assembly................................12
5.1 Belt theory.................................. 2
5.1.1 Why it is so important to use origi-
nal belts from the retail dealer?....... 2
5.2 PTO belt, 20B, 26B .................... 4
5.2.1 Description ............................. 4
5.2.2 Disassembly........................... 4
5.2.3 Inspections ............................. 5
5.2.4 Assembly................................ 6
5.3 Hydraulic pumps belts,
20B, 26B ..................................... 6
5.3.1 Description ............................. 6
5.3.2 Disassembly........................... 7
5.3.3 Inspections ............................. 7
5.3.4 Assembly................................ 7
