Tiffin Motorhomes WAYFARER 2021, Руководство пользователя

Страница: 138 / 170

ROUTINE MAINTENANCE CONTINUED
MOISTURE MANAGEMENT CONTINUED
STORAGE AND OTHER ISOLATED AREAS IN THE MOTORHOME
Storage areas are more difficult to condition since the areas are isolated from the main body of
the motorhome. The surfaces of these areas are more at risk for condensation and surface mold
growth.
To minimize this risk, clean storage areas regularly and allow an air space between stored
items and the exterior wall to promote air circulation.
USE OF UN-VENTED COMBUSTION EQUIPMENT
Un-vented combustion equipment, such as propane stove-tops are a source of moisture within
the motorhome. For every gallon of fuel consumed, approximately one gallon of water vapor is
evaporated into the air. Whenever possible, operate an exhaust fan in combination with the use
of any un-vented combustion appliance within the motorhome.
Water vapor and other combustion byproducts should be vented to the exterior of the
motorhome. The motorhome owner should strictly follow use and maintenance instructions
for safe operation of any combustion equipment, particularly un-vented equipment.
EXTERIOR CARE OF YOUR MOTORHOME
The exterior shell of the motorhome is the primary weather and moisture barrier. Over life of
the the motorhome, the shell will require regular care and maintenance in accordance with
other instructions for exterior care.
The shell includes the roof, sidewalls, windows, doors and under floor of the motorhome.
Particular attention needs to be devoted to ensure these components are maintained to ensure a
tight barrier against bulk water intrusion. The shell should be inspected periodically for tears,
gaps and condition of sealants in accordance with this owners manual.
Areas that require maintenance should be resealed utilizing a similar, high quality sealant used
by the manufacturer. Particular attention should be devoted to ensure the slide outs are
functioning properly. Each time a slide out is used, it should be inspected to ensure proper
operation and sealing. The slide out gaskets should also be inspected to ensure proper sealing
when the slide out is operated.
130