Tico Pro-Spotter, Руководство по обслуживанию, Страница: 33 / 211

PRO-SPOTTER GENERAL INFORMATION
TICO Manufacturing
Service Manual 1-5
Service Hydraulic System Safely

WARNING
Always dispose of used hydraulic oil properly.
(See “Dispose of Waste Materials Safely” on page 1-6.)
Service Cooling System Safely

WARNING

WARNING
Always dispose of used engine coolant properly.
(See “Dispose of Waste Materials Safely” on page 1-6.)
Handle Fuel Safely
Handle fuel with care—it is highly flammable.

WARNING
Store fuel according to local, state, or federal ordinances
and recommendations from your fuel supplier.
Never overfill or allow the tank to become empty.
Use clean, fresh fuel.
Do not fill above the fuel filler neck.
Handle Chemical Products Safely

WARNING
Routine service often requires the use of various
chemical products, including lubricants and cleaning
solutions. Many of these chemicals are flammable and
can pose health risks if not handled properly.
• Never mix chemicals. Mixing chemicals can produce
toxic or explosive results.
• Follow the manufacturer’s recommendations for safe
usage and handling of the product.
• Various materials may pose a health hazard if used
incorrectly. A Safety Data Sheet (SDS) contains
important information regarding proper handling and
health hazards, as well as emergency response
procedures. Contact the chemical manufacturer to
obtain a SDS for the chemical product.
The hydraulic system is under pressure, and the
oil may be hot!
• Always allow the tractor to cool completely
before performing service.
• Always relieve pressure in the hydraulic
system before performing service.
• Always use appropriate safety equipment and
clothing to protect exposed skin and eyes
from high-pressure oil.
• Tighten all connections to proper
specifications before applying pressure.
• Never use bare hands to check for leaks. Oil
under pressure can penetrate the skin and
can cause gangrene within a few hours if not
properly removed. Use a piece of cardboard
to check for leaks.
Failure to follow appropriate safety precautions
could result in death or serious injury.
Engine coolant is hot and under pressure! Allow
the cooling system to cool completely before
performing service.
Rotate the filler cap 1/2-turn counterclockwise
and allow pressure to vent before removing filler
cap.
Failure to follow appropriate safety precautions
could result in death or serious injury.
Contact with anti-freeze can damage your skin.
Use gloves when working with anti-freeze. If you
come in contact with anti-freeze, wash it off
immediately.
• Never remove the fuel cap from the fuel tank
or add fuel when the engine is running or
while the engine is hot.
• Do not smoke when handling fuel. Never fill
or drain the fuel tank indoors.
• Do not spill fuel. Clean up spilled fuel
immediately.
• Never handle or store fuel containers near an
open flame or any device that may create
sparks and ignite the fuel or fuel vapors.
• Be sure to reinstall and tighten fuel cap
securely.
• Use an approved container; the spout must fit
inside the fuel filler neck. Avoid using cans
and funnels to transfer fuel.
Exposure to chemical products could result in
serious injury. Handle chemical products with
care. Refer to the chemical manufacturer’s Safety
Data Sheet (SDS) for information regarding health
hazards, safe handling, and emergency response
procedures.