TIBCO Foresight® HIPAA Validator® Desktop Standards and Guidelines Reference
Manual
24 | Anatomy of a Guideline
Explanation for Segment Table Example
A
Page header
. By default, there is no page header. You can insert one in EDISIM
Doc Builder under Profile | Options | Formatting tab.
B
Transaction or message title
. You can change this in Standards Editor. Click
on the Transaction or message line at the top and change the Description in
the top pane or in the bottom pane’s Detail tab.
C
Functional group
(X12 only). Normally, this should not be changed. If
necessary, you can change it in Standards Editor. Click on the transaction or
message at the top, and then change the Functional Group field in the bottom
pane’s Detail tab.
D
Transaction or message purpose
. You can change it in Standards Editor. Click
on the transaction or message at the top, and then change the Purpose field in
the bottom pane’s Detail tab.
E
Level notes.
The top one is a level 1 note. The next one is a level 2 note. In this
example, the names of the note levels have been changed in Standards Editor.
Use File | Properties | Level Notes tab. Slowly click on the Note Name in the
bottom of the dialog box and type the name. To insert or change notes on the
first page of the guideline document, click on the transaction or message, click
Edit Notes in the bottom pane’s Detail tab, select the level, and then type the
note.
F
Segment position number
, showing position of the segment within the
transaction or message. You can change this position number in Standards
Editor. Click on the transaction or message at the top, and then change the
Position Number field in the bottom pane’s Detail tab. Be sure the new number
is between the numbers of the surrounding segments, whether they are used or
not used.
G
Segment ID or tag
. You cannot change it directly. Instead, use Standards
Editor to create a new segment in the segment dictionary and then insert it in
this position in the transaction or message.
H
Segment name or description
. You can change this in EDISIM Standards
Editor. To change it in a particular location, click on the segment in the