INSTRUCTION MANUAL
B101 / B102
Charging the Battery
Before using this product, fully charge the
B101/2
headset unit by
plugging the charger into an AC outlet and inserting the connection pin
into the Charging Port on the headset.
Headset Functions
1. Power ON your headset:
2. Power OFF your headset:
Pairing the B101/2 Headset to Your Phone:
1
. Turn your phone
OFF
entirely and then turn it back
ON
to refresh its Bluetooth memory.
2
. Find the Bluetooth menu in your mobile phone turn the Bluetooth function ON.(Check your mobile phone user guide)
4
. On your phone, perform a Bluetooth “device discovery” to add the
B101/2
headset as a new device. It only takes a few seconds to search
& find the
B101/2
Bluetooth headset.
5
. When the
B101/2
headset is discovered (found) the phone will display “
B101/2
”
6
. If prompted by your phone to enter a code, enter; "
0000
" and the phone will now pair with the headset and be ready to use.
7
. If supported by your phone menu, set the
B101/2
as "set as authorized "or "add to trusted devices".
8
. Keep the Bluetooth function on your phone ON with your phone near, the headset will automatically pair.
9
. If the pairing is not successful, the headset will shortly return to the standby mode.. Please repeat the process to try the pairing again.
10.
Refer to your phones User Manual for any additional steps.
Note
: To conserve power, the unit automatically turns off when not paired with your Bluetooth Phone.
Do NOT return this product to your retailer.
For Assistance please call 1-800-936-1168
Operating the Headset:
1. To ANSWER or END a call:
2. To REJECT* a call:
3. To REDIAL * the last call:
Press and Hold the Volume Up Button for about 3 seconds and then release.
4. To activate VOICE DIALING*:
5. To adjust the VOLUME:
FUNCTION
VOLUME (+) button
Ear Hook
Charging Port
LED
VOLUME (-)
button
3
. With the
B101/2 POWER OFF,
hold the headset 12” inches away from your mobile phone and Press and Hold the
FUNCTION
button
on the headset for about 6 seconds until the LED light flashes blue and red alternating which indicates your headset is now ready to be
“paired” with your Bluetooth Mobile Phone.
Press the
FUNCTION
button once when there is an incoming call to answer. Press the
FUNCTION
button once again to end the call.
Press and Hold the the
FUNCTION
button (approx. 2-3 seconds) when there is an incoming call you want to ignore and send it to your voicemail.
While connected to your phone, Press the
FUNCTION
button once. Voice commands must already be recorded into your phone for this function
to operate (see your phones user guide)
Click the
VOLUME UP
or
VOLUME DOWN
button during a call to adjust to the desired level. The volume level will be remembered by the
B101/2
for the next call.
* To use these functions, your phone/device must also support the Bluetooth Profile.
Press and Hold the
FUNCTION
button (approx. 2-3 seconds) until the blue
.
Press and Hold the FUNCTION button (approx. 2-3 seconds) until the red indicator
flashes twice and the power will turn off.
indicator flashes four times
Indicator
button
