Thundercomm TurboX C865 Dev Kit Скачать руководство пользователя

Страница: 52 / 60

`www.thundercomm.com.

7.1.5

Force_USB_BOOT button

The onboard (see Section 1.2.2, #22) push-button is used for emergency USB boot for during

development.

7.2

LED’s

There are one power indication LED, two status LEDs and four user LEDs on C865 DEV KIT.

The status LEDs report the status of the Bluetooth and Wi-Fi devices onboard.

The user LEDs are driven directly by the SoC.

7.2.1

User LED 1-4

The four user LEDs are surface mount green LEDs, 0603 size, located between two USB Type A

connectors and labeled USER LEDS 3 2 1 0.

7.2.2

Wi-Fi status

The C865 DEV KIT Wi-Fi LED is located next to the USB OTG connector. The Wi-Fi LED reflects

the status of the Wi-Fi device.

7.2.3

Bluetooth status

The C865 DEV KIT BT LED is located next to the WI-FI LED. The BT LED reflects the status of the

Bluetooth device.

7.2.4

Power Indicator LED

The C865 DEV KIT power indicator is located beside the DC jack. The power indicator LED notifies

the user that the power is applied.

Содержание TurboX C865 Dev Kit





























































Результаты поиска

Содержание TurboX C865 Dev Kit

Отзывы:

Похожие инструкции для TurboX C865 Dev Kit

Бренды по названию

Популярные бренды

Thundercomm TurboX C865 Dev Kit, Руководство пользователя по оборудованию

Результаты поиска

Содержание TurboX C865 Dev Kit

Отзывы:

Похожие инструкции для TurboX C865 Dev Kit

Бренды по названию

Популярные бренды