![Thundercomm TurboX C610 Open Kit Скачать руководство пользователя страница 31](http://html1.mh-extra.com/html/thundercomm/turbox-c610-open-kit/turbox-c610-open-kit_user-manual_1113737031.webp)
Thundercomm TurboX C610 Open Kit
Rev. 1.0
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
31
eth0 Link encap:Ethernet HWaddr 00:55:7B:B5:7D:F7
inet addr:169.254.4.1 Bcast:169.254.4.255 Mask:255.255.255.0
inet6 addr: fe80::255:7bff:feb5:7df7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:158 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19196 (18.7 KiB) TX bytes:2844 (2.7 KiB)
Interrupt:86
4. Do ping test, device ping PC or PC ping device.
NOTE:
If ping does not work, check the PC firewall and try to ping outside the firewall.
3.10
Camera:
Figure 2 Dual IMX577 360° Camera Modules
This chapter details the GStreamer commands for multimedia use cases supported on
LEPDK.
The commands are gst-launch commands. The gst-launch tool is a command-line
utility for
building and running a GStreamer pipeline. The pipeline to be built and run is
specified as a
collection of elements and the properties are separated by a '!' mark.