THUNDER LASER
NOVA-24
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653
Dongguan City, Guangdong Province, China
17
3.2 Location
Before you install the laser system, you should select an appropriate location. Follow the
guidelines shown below:
1. Avoid locations where the system is exposed to high temperatures, dust
and high humidity. (The humidity must not exceed 70% and the temperature
must not be close to the dew point.)
2. Avoid locations, where the system is exposed to mechanical shocks.
1. Breaker protection: Do not connect other devices via the laser breaker, as
the laser system requires the full amperage.
2. DO NOT open any of the machine’s access panels while the unit is plugged in.
Opening a panel may expose the operator to the unit’s AC input power.
3. DO NOT make or break any electrical connections to the system while the
unit is turned on.
1. Avoid locations with poor air circulation; select a location close to
ventilation (if available).Select a location, whose room temperature is
between 15 °C and 25 °C (59° – 77° F).
2. This is fundamental to maintain consistent and reliable operation of a CO2
laser, Metal RF or Glass tube and the machine itself.Avoid higher ambient
temperatures and strong exposure of the engraver to the sun. Use blinds, if
required.
3. Mechanical shock and vibration of the laser will have detrimental effects
on the performance and life expectancy of the machine. It will manifest (over
a period of time) with a noticeable decrease in performance and increased
maintenance required, possibly even damage. Setting your Thunder Laser up
in s suitable temperature controlled, dust free, moisture free, level, stable
surface (a level concrete floor) with the recommended extraction is critical to
the ongoing performance of the machine. It is also a warranty condition.
