Thought Technology MyoTrac T4000P, Руководство пользователя

Страница: 16 / 26

 
10
The three threshold switches, LOCK/OFF , CUE TONE/OFF and
BLW/ABV are only functional when the front panel power switch
is set to THR . Possible combinations are:
LOCK/OFF CUE/OFF ABV/BLW
1 OFF OFF ABV
Proportional tone feedback above threshold.
2 OFF OFF BLW
Proportional tone feedback below threshold.
3 OFF CUE TONE
4 or 60 sec.
ABV
Cue tone when EMG above threshold for >
4 or 60 seconds. (Goes off immediately
when EMG goes below threshold).
4 OFF CUE TONE BLW
Not a valid position. Cue tone (CUE TONE)
works only for above (ABV) threshold
position.
5 LOCK CUE TONE ABV
Same as condition 3; however the tone
locks on until the power switch
(OFF/CONT/THR) is turned off.
6 LOCK CUE TONE BLW
Not a valid position.
7 LOCK OFF ABV
Not a valid position.
8 LOCK OFF BLW
Not a valid position.
Side Panel Jacks
(see figure 8)
INPUT: Plug the MyoScan sensor in here.
Plugging the earphones in here disconnects the internal
speaker and sends tone feedback through the earphones.
0-2V: Provides a 0-2 Volts output signal. The MyoTrac can be
connected to other third party device with an isolated voltage input
that accepts 0-2V.
Make certain the instrument complies with IEC
601-1.
Note: This output is the same for all the gain settings. An output
value of 2 Volts will represent 20

V at the x1 setting, 200

V at
x10 and 2000

V at x100 .