Copyright © 2017 Thorlabs
3 Operating the TED4015 Series
31
3.9 Display Configuration
The display can be configured to show two, four or six values on the screen. Factory setting is
the two value screen.
You can select your favored measurement screen by pressing the
Display
button or in the Dis-
play Configuration menu. Press the
Menu
button, scroll to the Display Configuration and press
the
Enter
button or the adjustment knob. You get the following display configuration:
In the
Display configuration
menu you can select the favorite screen configuration with two,
four or six values. For each value number (depending on selected values per screen), you can
choose one of the following setpoints or readings:
·
Source Setpoint; shown value dependent on selected operating mode (Temperature Set-
point if constant temperature mode or TEC Current Setpoint if constant current mode)
·
Temperature Setpoint
·
TEC Current Setpoint
·
Temperature Reading
·
Temperature Deviation Reading
·
Temperature Sensor Signal Reading
·
TEC Current Reading
·
TEC Voltage Reading
·
TEC Power Reading
For choosing the desired values please select the appropriate line by turning the adjustment
knob. Then press
Modify
or the adjustment knob and choose your desired value. Confirm your
selection by pressing
Done
or the adjustment knob again.
