THORLABS SPDMH2, Руководство по эксплуатации, Страница: 18 / 22

Page 14
MTN028160-D02
SPDMHx Series 5 Appendix
5.4 Safety
The safety of any system incorporating the equipment is the responsibility of the assembler of
the system.
All statements regarding safety of operation and technical data in this instruction manual will
only apply when the unit is operated correctly as it was designed for.
The SPDMHx Series must not be operated in explosion endangered environments!
Do not obstruct any air ventilation slots in the housing!
Do not remove covers or open the cabinet. There are no user-serviceable parts inside!
Handle the SPDMHx Series devices with care. Do not drop it or expose it to excessive mechan-
ical shocks or vibrations.
This precision device is only serviceable if returned and properly packed into the complete ori-
ginal packaging including the cardboard inserts. If necessary, ask for replacement packaging.
Refer servicing to qualified personnel!
Changes to this device cannot be made nor may components not supplied by Thorlabs be used
without written consent from Thorlabs.
Attention
Prior to applying power to the SPDMHx Series, make sure that the protective conductor of the 3
conductor mains power cord is correctly connected to the protective earth ground contact of the
socket outlet! Improper grounding can cause electric shock resulting in damage to your health
or even death!
All modules must only be operated with duly shielded connection cables.
Attention
Mobile telephones, cellular phones or other radio transmitters are not to be used within the
range of three meters of this unit since the electromagnetic field intensity may then exceed the
maximum allowed disturbance values according to IEC 61326-1.
This product has been tested and found to comply with the limits according to IEC 61326-1 for
using connection cables shorter than 3 meters (9.8 feet).