THORLABS PWA120, Руководство по установке, Страница: 5 / 12

PWA120 Adapter Plate for 1.5” Post Accessories Chapter 2: Installation
Rev A June 2021 Page 3
2.2. Fitting to a PFR Series Rigid Mount Frame
1. Slide the adapter into place over the mount.
2. Align the four outer holes on frame top plate with the holes in the adapter plate. The adapter plate can be rotated
90 degrees if a different orientation is required.
3. Using the included 5 mm hex key, M6 washers and M6 x 15 mm screws, attach adapter plate to the breadboard
frame.
Figure 1 Installation – PFR Series Frame