THORLABS PMT2100 Series, Руководство пользователя

Страница: 45 / 51

PMT2100 Series Photomultiplier Tubes Chapter 12: Commands
Rev D, June 6, 2019 Page 41
Chapter 12 Commands
The USB commands are based on the SCPI command set. If you are new to
SCPI, refer to www.keysight.com for details. You must use Keysight driver to
communicate with the device. All SCPI instruments implement common
commands declared mandatory by IEEE 488.2. The commands implemented are
as follows:
Mnemonic Name 488.2 Section
*IDN? Identification Query 10.14
*STB? Read Status Byte Query 10.36
The specific commands that are implemented in the PMT2100 series are as
follows:
Command Description
INSTrument
:NSELect <numeric>
Selects Source Channel by
Number
:NSELect?
Gets the Selected/Last
Channel Number
[:SELect] <identifier>
SELect - Selects Source
Channel by Name <GAIN;
BIAS; OFFSET; TRIP>
[:SELect]?
Gets the Selected/Last
Channel Name