© 2019 Thorlabs
3 Operating Instructions
16
3.3.1 Software Requirements
All models of the PM101x can be run with the Thorlabs' OPM software.
Please find the requirements for the PC intended to be used for operation of the PM101x on
the
.
3.3.2 PM101x Specific Software Functions
When using a PM101 power meter interface, the latest version of the OPM software shows
several power meter specific functions. To see details, please also visit the
.
3.3.2.1 PM101 Specific Software Functions
1. When a PM101x power meter is connected, the OPM software recognizes NTCs in the
devices section. The OPM now allows users to adjust settings, view measurement results
and to integrate the NTC measurements results in long-time monitoring experiments. For
more information, please see the OPM manual.
2. When a PM101 is connected, it is possible to configure the analog AO2 port and display the
output voltage.
3.3.2.2 PM101A Specific Software Functions
When a PM101A is connected, it is possible to configure the analog SMA port and display the
output voltage.
3.4 Maintenance and Service
Protect the PM101x from adverse weather conditions. The PM101x is not water resistant.
Attention
To avoid damage to the instrument, do not expose it to spray, liquids or solvents!
The unit does not need a regular maintenance by the user. It does not contain any modules
and/or components that could be repaired by the user himself. If a malfunction occurs, please
contact
for return instructions.
25
