THORLABS PDA8000-1 Скачать руководство пользователя

Страница: 6 / 39

Safety

________________________________________________________________________________

______________________________________________________________________________________________________

1 General description of the PDA8000

1.1 Safety



Attention



All statements regarding safety of operation and technical data in

this instruction manual will only apply when the unit is operated

correctly.

Before applying power to your PRO8000 (-4) / PRO800 system, make

sure that the protective conductor of the 3 conductor mains power

cord is correctly connected to the protective earth contact of the

socket outlet!

Improper grounding can cause electric shock with damages to your

health or even death!

Modules may only be installed or removed with the mainframe

switched off.

All modules must be fixed with all screws provided for this purpose.

Modules of the 8000 series must only be operated in the mainframe

PRO8000, PRO8000-4 or PRO800.

All modules must only be operated with duly shielded connection

cables.

Only with written consent from Thorlabs may changes to single

components be carried out or components not supplied by Thorlabs

be used.

This precision device is only dispatchable if duly packed into the

complete original packaging including the plastic form parts. If

necessary, ask for a replacement package.

Содержание PDA8000-1








































Результаты поиска

Содержание PDA8000-1

Отзывы:

Похожие инструкции для PDA8000-1

Бренды по названию

Популярные бренды

THORLABS PDA8000-1, Руководство по эксплуатации

Результаты поиска

Содержание PDA8000-1

Отзывы:

Похожие инструкции для PDA8000-1

Бренды по названию

Популярные бренды