background image

 

 

29  

________________________________________________________________________________

 

______________________________________________________________________________________________________

© 2012   Thorlabs

 

 

5.2  Thorlabs “End of Life” policy (WEEE) 

As required by the WEEE (Waste Electrical and Electronic Equipment Directive) of 
the European Community and the corresponding national laws, Thorlabs offers all 
end users in the EC the possibility to return “end of life” units without incurring 
disposal charges. 
 
This offer is valid for Thorlabs electrical and electronic equipment 

 

sold after August 13

th

 2005  

 

marked correspondingly with the crossed out “wheelie bin” logo (see Figure 3) 

 

sold to a company or institute within the EC  

 

currently owned by a company or institute within the EC  

 

still complete, not disassembled and not contaminated 

 
As the WEEE directive applies to self contained operational electrical and electronic 
products, this “end of life” take back service does not refer to other Thorlabs 
products, such as 

 

pure OEM products, that means assemblies to be built into a unit by the user 
(e. g. OEM laser driver cards)  

 

components  

 

mechanics and optics  

 

left over parts of units disassembled by the user (PCB’s, housings etc.).   

 
If you wish to return a Thorlabs unit for waste recovery, please contact Thorlabs or 
your nearest dealer for further information. 
 

5.2.1  Waste treatment on your own responsibility 

If you do not return an “end of life” unit to Thorlabs, you must hand it to a company 
specialized in waste recovery. Do not dispose of the unit in a litter bin or at a public 
waste disposal site. 
 

Содержание PDA8000-1








































Отзывы: