THORLABS PAX1000, Быстрая справка

Страница: 10 / 21

© 2019 Thorlabs GmbH 6
PAX1000
2.2 Installing Software
Note
Do not connect the PAX1000 to the PC prior to software installation!
For software installation, you need administrator privileges on your computer!
Attention
Exit all running applications on your PC as the installer may require a reboot of your PC
during installation!
Thorlabs is breaking new ground in saving our environment. We decided to refrain from ship-
ping an installation CD ROM and to offer a download of the software from our website instead.
As an additional advantage to this distribution method, the most recent version of the software
will always be available online.
The PAX1000 software package contains beside the PAX1000 software a NI VISA Runtime
and the Thorlabs DFU Wizard. The latter is required to enable the user to install future firmware
updates to the PAX1000. The software package can be downloaded from the website
https://www.thorlabs.com/software_pages/ViewSoftwarePage.cfm?Code=PAX1000x
Note to Windows 8.1 and Windows 10 users
The NI VISA installer might require disabling the Windows Fast Startup feature. This feature
was introduced with Windows 8 and is enabled by default. The Fast Startup may interfere with
correct hardware recognition by NI VISA, so it is strongly recommended to disable the Fast
Startup as the installer requests.
In the following, an installation to an Windows 7 64 bit operating system is described, including
the installation of NI VISA Runtime 5.4.0 and Microsoft.NET Framework 4.5.1.
Download the software package to your computer, unzip it and execute the setup.exe: