THORLABS NanoTrak KNA-IR, Руководство пользователя Apt

Страница: 16 / 47

Page 14 ETN043886-D02
K-Cube NanoTrak Auto-Alignment Controller
4.2 Overview
After the power up sequence is complete, the normal operating screen is displayed.
Press the MENU button to enter the settings mode.
Use the wheel to scroll through the menu options.
Press the MENU button to enter a particular option.
Home the outputs - see Section 4.2.1.
Set the Output Voltage for HV OUT 1 - see Section 4.2.2.
Set the Output Voltage for HV OUT 2 - see Section 4.2.3.
Enable the HV outputs - see Section 4.2.4.
Set the max output voltage of the HV outputs - see Section 4.2.5.
Select the optical power source - see Section 4.2.6.
Turn the external output I/O 2 ON - see Section 4.2.7.
Set the Latch mode of HV outputs- see Section 4.2.8.
Turn AC Boost ON - see Section 4.2.9.
Turn the XY Scan ON - see Section 4.2.10.
Set the wheel adjustment rate- see Section 4.2.11.
Set the display brightness - see Section 4.2.12.
Display information - see Section 4.2.13.
O P T I O N M E N U
U s e m e n u & w h e e l
2 O U T 1 V O L T A G E
P r e s s m e n u t o . . .
4 O U T P U T S E N A B L E
P r e s s m e n u t o . . .
3 O U T 2 V O L T A G E
P r e s s m e n u t o . . .
1 H O M E O U T P U T S
P r e s s m e n u t o . . .
MENU
WHEEL
T r a c k i n g
1 : 5 0 . 0 % 2 : 4 9 . 1 %
5 O U T P U T S R A N G E
P r e s s m e n u t o . . .
8 O U T P U T S L A T C H
P r e s s m e n u t o . . .
6 S I G N A L I N
P r e s s m e n u t o . . .
7 S I G N A L O U T
P r e s s m e n u t o . . .
9 A C B O O S T
P r e s s m e n u t o . . .
1 1 W H E E L S T E P
P r e s s m e n u t o . . .
1 2 B R I G H T N E S S
P r e s s m e n u t o . . .
1 3 I N F O R M A T I O N
S w R e v : 0 1 0 1 0 9
1 0 X Y S C A N
P r e s s m e n u t o . . .