7
MLS203 Series XY Scanning Stage
3.2.2
Fitting the Finger Guards
The stages are supplied with finger guards to avoid trapping of body parts or cables
in the mechanism. These should be fitted before the stage is mounted on the
microscope as follows:
1) Offer up the finger guards to the stage as shown below, and secure using the M3
x 16 bolts supplied.
Fig. 3.1 Fitting the finger guards
3.2.3
Mounting To Microscope
The stage can be mounted to select inverted and upright microscopes from Olympus
and Nikon using mounting brackets which are purchased separately. Details on
mounting the stage to a particular microscope are contained in the fitting instructions
for the brackets.
M3 x 16 screw (qty 6)
