THORLABS LNR502E, Руководство пользователя

Страница: 8 / 45

Page 6 ETN053047-D02
LNR502E Encoded Long Travel, Linear Stage with Stepper Motor Actuator
3.3.3 Building an XY Configuration
Bolt the X-axis stage to the work surface as detailed in Section 3.3.2. then, referring to Fig. 3.2, proceed as follows:
1) Fit the dowels supplied to the moving platform of the lower stage.
2) Fit the spacer plate (LNR50P3) into place as shown below, ensuring that the dowels in the lower stage locate correctly in
the holes in the bottom surface of the spacer plate.
3) Fit a bolt (M6 x 12 or 1/4-20 x 1/2”, not supplied) through the hole in the center of the spacer plate and into the top platform
of the lower stage. Tighten the bolt to secure the plate in position.
Fig. 3.2 Fitting a Spacer Plate
4) Fit the dowels supplied to the top surface of the spacer plate.
5) Fit the Y-axis stage into place ensuring that the dowels in the spacer plate locate correctly in the holes in the lower surface
of the stage.
6) Fit two bolts (M6 x 12 or 1/4-20 x 1/2”, not supplied) through the holes in the upper stage and tighten to secure the stage
to the spacer plate beneath.
Caution
Use only bolts of the stated length. Longer bolts will protude into the stage and damage the internal mechanism.
2
1
3