THORLABS ITC4000 Series, Руководство по эксплуатации, Страница: 50 / 105

© 2018 Thorlabs 48
ITC4000 Series
3.15 Display Configuration
The display can be configured to show two, four or six values on the screen. Factory setting is
the six value screen.
You can select your favored measurement screen by pressing the Display button or in the Dis-
play Configuration menu. Press the Menu button, scroll to the Display Configuration and press
the Enter button or the adjustment knob. You get the following display configuration:
In the Display configuration menu you can select the favorite screen configuration with two,
four or six values.
For each value number (depending on selected values per screen), you can choose one of the
following set points or readings:
·
LD Source set point; shown value dependent on selected operating mode (LD Current set
point if constant current mode or LD Optical Power set point if constant power mode)
·
LD Current set point
·
LD Optical Power set point
·
Photodiode Current set point
·
Thermopile Voltage set point
·
TEC Source set point
·
Temperature set point
·
TEC Current set point
·
LD Current Reading
·
LD Voltage Reading
·
LD Power Reading
·
Photodiode Current Reading
·
Optical Power Reading via Photodiode