THORLABS DMH40-F01, Руководство по эксплуатации

Страница: 20 / 66

© 2021 Thorlabs 15
DMH40
4.3 Mounting
Mounting the DMH40
The imperial version DMH40 and metric version DMH40/M each feature two different threads
for mounting of the deformable mirror on a post.
To mount the DMH40, please use either a post with a 1/4-20 or 8-32 threaded setscrew, 6 mm
in length.
To mount the DMH40/M, please use either a post with a M6 x 1 or M4 x 0.7 threaded setscrew,
6 mm in length.
Mounting Optics on the DMH40
The SM2 external thread allows mounting of appropriate mounting optics or lens tubes.
To mount a Thorlabs 30 mm cage system, both DMH40 and DMH40/M offer four 4-40 inner
threads with 5 mm depth on the front of the device.
4.4 First Steps
After installing the Thorlabs Deformable Mirror software and mounting the DMH40 to the optical
setup, proceed with the following steps:
1. Connect the power supply to the mains outlet using the provided power cord.
2. Connect the DC output of the power supply to the DC input (4).
3. Connect the USB cable to the DMH40 and to the PC. Make sure the status LED (3) lights
up, first red (no DC input recognized) and finally green (ready).
4. The operating system recognizes the connected DMH40 and installs necessary software
components (device driver).
5. Start the DMH40 software from the desktop icon.
6. The application starts and automatically connects to the DMH40.
7. A warning screen may appear: DataSocket Error: