THORLABS CLD101 Series, Руководство по эксплуатации

Страница: 42 / 92

© 2018 Thorlabs 40
CLD101x
4 Write Your Own Application
In order to write your own application, you need a specific instrument driver and some tools for use
in different programming environments. The driver and tools are being installed to your computer
during software installation and cannot be found on the installation CD.
In this section the location of drivers and files, required for programming in different environments,
are given for installation under Windows XP (32 bit), Windows VISTA (32 and 64 bit) and Windows
7 (32 and 64 bit) Windows 8 (32 and 64 bit), Windows 10 (32 and 64 bit). These drivers and
samples are the same as used for Thorlabs 4000 Series.
In order to fully support 64 bit LabView version, the installation offers two installer versions:
·
for Win XP - SP2+, Windows VISTA (32 bit) and Windows 7 (32 bit), Windows 8 (32 bit),
Windows 10 (32 bit): Install "TL4000 VXIpnp Instrument Driver (32 bit)"
·
for Windows VISTA (64 bit), Windows 7 (64 bit), Windows 8 (64 bit), and Windows 10 (64 bit):
Install "TL4000 VXIpnp Instrument Driver (64 bit)"
In the table below you will find a summary of what files you need for particular programming
environments.
Programming environment Necessary files
C, C++, CVI *.h (header file)
*.lib (static library)
C# .net wrapper dll
Visual Studio *.h (header file)
*.lib (static library)
or
.net wrapper dll
LabView *.fp (function panel) and VXIpnp Instrument Driver
Beside that, LabVIEW driver vi's are provided with the
*.llb container file
Note
All above environments require also the VXIpnp Instrument Driver dll !
In the next sections the locations of above files are described in detail.