4
•
When transporting, never tilt to more than 45 degrees.
•
The appliance should be transported only in a vertical upright position
•
The packaging as supplied must be intact during transportation
•
If during the course of transport the appliance has to be transported
horizontally, it must only be laid on its left hand side when standing in the
front of the appliance. After bringing it to the upright position, it must not
be operated for at least 4 hours to allow the system to settle. The
manufacturer will not be held responsible if these instructions are
disregarded.
•
The appliance must be protected against rain and moisture
•
When positioning your appliance take care not to damage your flooring,
Kitchen furniture, related parts and doors, pipes, wall coverings etc.
•
Empty any water in the drain tray before moving. See section ‘Defrosting’
and ‘Care & cleaning’ for further information
•
Do not move the appliance by pulling by the door
•
Hold the base and lift the refrigerator carefully
•
Never hold the door handle as support
•
Never place the refrigerator upside down or lie it down
•
Move refrigerator by using its two hind roller feet as an axis and then
tilting it slightly to move
•
Make sure that the defrost water pipe at the back of the product is fixed
to the plastic evaporating pan on the top of the compressor, to avoid
defrost water spillage on the floor.
Care must be taken while cleaning / carrying the appliance to avoid
touching the bottom of the condenser metal wires at the back of the
Appliance as you might injure your fingers and hands.
Transportation of your Appliance
