THOR Jayco TALON 2021, Руководство пользователя

Страница: 188 / 209

186
Section 12: Interior
Pantry or Hutch (if so equipped)
Your recreation vehicle may have a pantry or hutch that you can use for storage. Make sure
all items stored in the pantry or hutch are secured to prevent shifting during travel. This
cabinetry has been designed to accommodate the normal camping items which may be bulky
but not necessarily heavy. Remember your recreation vehicle’s load capacity is designed
by weight, not volume, so you cannot necessarily use all available space.
If your pantry or hutch has sliding pantry shelves, they have been equipped with a locking
mechanism to keep them in place during transit. To secure the shelf in place, push it all of
the way in until the latch tab clicks into place. Always pull out slightly on the shelf to make
sure that it is stationary and secure in the transit position. To release the shelf, push in on the
tab and pull the shelf slowly towards you.
Your RV’s load capacity is designated by weight, not by volume, so you can-
not necessarily use all available space when loading the vehicle. Do not ex-
ceed your GVWR and ensure you are loading the vehicle as evenly as you can
for the best possible handling. Ensure heavy items are secured so they do not
shift during travel.
Booth Dinette (if so equipped)
The dinette is designed to seat up to four adults. Depending on your model, there may be
a storage area in the dinette bench. To access this storage, remove all the cushions and lift
up on the bottom seat support. If the bottom seat support is secured with screws, do not
remove the seat support or use this area for storage .
The dinette seats that are secured with screws contain factory installed equipment and should
only be accessed by a qualified service technician.
Converting the dinette to the bed position
Remove all the cushions from the booth dinette. Lift up the tabletop and remove the detach-
able table legs. Place the tabletop on the ledges provided between the booth dinette benches.
Lay the seat back cushions against the back of the dinette bench.
Lay the dinette seat bottom cushions in between the seat back cushions. The area where
the cushions meet should be slightly raised. Push the raised cushion ends down gently as
the cushions are designed to fit snugly. Reverse this process when converting back to the
booth dinette.
Free-Standing Table and Chairs (if so equipped)
The free-standing dinette table can be positioned to seat up to four people. To prevent dam-
age, the free-standing dinette chairs should be fastened securely at the dinette table when
you are traveling.