THOR GL169-N, Инструкция по установке и эксплуатации

Страница: 21 / 28

21
Troubleshooting
VII.
PROBLEM POSSIBLE CAUSE ACTION TO TAKE
Pilot burner
cannot stay lit.
Not enough gas or gas pressure.
 Check the gas tank. Ensure that it is
not empty.
 Check the gas pressure. Ensure that
you have sufficient gas pressure.
 Call your gas provider.
Not enough time for the gas to
flow and thermocouple to heat up.
 Hold the knob in for at least 20
seconds to allow enough time for the
gas to flow and thermocouple to heat
up.
Clogged pilot injector orifice.  Call your authorized service agent.
Faulty or loose thermocouple.
 Call your authorized service agent.
Faulty gas valve.

Call your authorized service agent.
Main burner does
not light.
Pilot burner is not lit. Light the pilot burner first.
Not enough gas or gas pressure.
 Check the gas tank. Ensure that it is
not empty.
 Check the gas pressure. Ensure that
you have sufficient gas pressure.
 Call your gas provider.
Clogged main burner injector
orifice
 Call your authorized service agent.
Faulty or loose thermocouple.  Call your authorized service agent.
Faulty safety gas valve.
 Call your authorized service agent.
Pilot keeps
cutting out.
Not enough gas or gas pressure.
 Check the gas tank. Ensure that it is
not empty.
 Check the gas pressure. Ensure that
you have sufficient gas pressure.
 Call your gas provider.
Clogged pilot injector/FDS
injector.
 Call your authorized service agent.
Faulty or loose thermocouple. 
Call your authorized service agent.
Faulty gas valve.

Call your authorized service agent.