Operation
6
In case of problems
If you experience any problems while installing or using these headphones, please refer to the
following instructions:
No sound
•
Check that your audio source, cradle and headphones are connected and supplied properly,
and are switched on.
•
Check that the rechargeable batteries are installed in the headset correctly. Have they been
recharged properly?
•
Check that the cradle is running, the indicator (8) must be lit.
•
Check that the source delivers a sufficient audio signal to the cradle's AUDIO IN input
socket (10).
Poor sound quality or interference
•
Check that the sound provided by the source is of sufficient quality and that the signal level is
not too low or too high.
•
When using non rechargeable batteries, check these are sufficiently charged.You can also try
using new batteries, but remove them before setting the headphones on their base.
•
Check that you have selected the best transmission channel 1, 2, 3 for your equipment’s
electromagnetic environment. If necessary try another channel, remembering to fine-tune
reception using the tuning control (4) again.
•
Check that the distance between the headphones and the cradle is within the operating range
(80 metres in the open air, or several tens of metres indoors dependent on the building
materials used and the charge remaining in the rechargeable batteries).
•
Check that the audio source provides stereo sound.
Switching off unexpectedly
•
The cradle has an automatic power off function.When no signal is received through the
cradle's AUDIO IN socket, it switches off. Switch on your audio source again and use the
tuning control (4) to adjust reception. If necessary, increase the audio source’s volume.
Features
Cradle
•
Power supply: 12 V (DC) via a 230 V - 50 Hz (AC) mains power supply adaptor
•
Transmission frequency: UHF - 3 channels (12):
864.30 MHz (1), 863.70 MHz (2) and 863.10 MHz (3)
•
Range: 80 metres in the open air
Headset
•
Power supply:Two AAA type 1.2 V rechargeable batteries.
If you encounter difficulties
Advisors are at your disposal to help you solve your problems at this telephone number.
WHP 465 - WHP 565 EN / RST - BEI / 12-2003
You can contact THOMSON by dialling: 0871 712 1312
(For Great-Britain, all calls will be charged 0,10£ / mn)
www.thomson-europe.com
WHP465-565_en 19/12/03 14:49 Page 6