20
7.5 network
This menu consists of the following submenus:
RSS
,
Weather
and
IP Settings
. First connect a CAT5E
(or higher quality) cable to the RJ-45 (ETHERNET) port of your receiver and ensure the other end is
connected to the internet accordingly. If there are questions or problems with the internet connection,
we recommend you to check details via the support or helpline of your internet provider.
Before you start to use the Internet functions please check the setup of the Internet connection via
IP
Settings
menu and confirm
SET
with
OK
. Usually the Internet connection should now been established
without any problem and ready to use. A message will inform you if the connection has been setup
successfully or not, use
OK
to confirm and press
9
to leave this menu.
Inside the menu use
pq
to highlight the submenu of choice and press
OK
to enter. Press
to quit or
9
to go one step back.
7.5.1 IP Settings
This menu allows you to setup or check the Internet connection. The default selection is
DHCP
set to
On
. Normally the setup is done automatically by this. To test if the Internet connection works, select the
item
SET
and press
OK
. If successful, a pop-up message box will show up and you can start using it. If
not successful, then check your cable or router. Alternatively set
DHCP
to
Off
. Then manually enter your
IP, Gateway and DNS values by using the
0 ~ 9
buttons. Select after entering these values the item
SET
and press
OK
to store and to check.
7.5.2 rSS Feed (really Simple Syndication)
This menu allows you to choose an RSS news link to read the latest news from different sources.
Use
pq
to highlight a link of your choice and press
OK
to enter. Select an item you want to read. Press
to quit. Also you have option to delete, add or edit an RSS feed of your own choice. Press the
GREEN
button
Add RSS Feed
to open the keyboard. Use
pq
t
u
to enter. If you need to use special symbols
press
P+/P-
. To save the created RSS link, select at the end
Save
and press
OK
.
7.5.3 Weather
This menu allows you to watch the weather in your region. Use
pq
to highlight the menu item
Weather
from the
Network
menu. If you have correct Internet connection then the weather page will
show up with details on screen. Use the
YELLOW
button
City List
to open a selection list with main
cities.
Use
pq
to highlight a major city near you and press
OK
to select. You can enter a city manually. Press
the
GREEN
button
Change City
to open a keyboard. Use
pq
t
u
to enter. If you need to use special
symbols, press
P+/P-
. To save the name, select at the end
Save
and press
OK
.
7.6 Software update
This receiver is equipped with different methods to update the software.
It can be used to add new functions, improve functions and to keep the receiver up-to-date.
7.6.1 S/W upgrade by otA
The Over-The-Air (OTA) software upgrade function is checking automatically if new a version is
available. If a new version is available then a message box appears on screen. Select
OK
to start
download and update immediately. Select
if you like to update another time. An OTA update might
