18
Auto Standby
:
This function allows you to set the hours after which the receiver should
automatically switch to standby mode. Available settings are:
1 hour
,
2
hours
,
3 hours
,
4 hours
,
5 hours
,
6 hours
and
Off
. If the receiver has not
been operated during the set time, it automatically switches to standby
mode. This is an additional way to reduce power consumption.
simpliTV List - Update
By default, this option is set to
On
, to ensure that the
simpliTV list
is always
up to date, respectively in case of an available update, a separate message
will be displayed. If you don't like to be notified, set this option to
Off
.
7.3.3 Time Settings
In this menu, you can adjust settings for the time and date
Time Settings
:
Select
Auto
to automatically synchronize the time and time zone, or
Manual
to set the time manually.
Timezone
:
The time zone can be adjusted in manual
Time Settings
.
Summer Time
:
This setting is only available when you set the time to
Manual
.
When the winter time is changing to
Summer Time
, it is necessary to switch
Summer Time
to
ON
.
7.3.4 Timer
Use the timer function to switch to a selected programme. Press
OK
to open a timer.
Timer Mode
:
Use
t
u
to select
Once, Monday-Friday, Daily, Weekly or Monthly
, factory
setting is set to
Off
.
Timer Action
:
Switch On
is set here to switch the receiver on at the desired time.
Channel
:
Press
OK
to open the channel list and press
pq
or
P +/-
to select the
desired channel and press
OK
to accept.
Start Date
:
Enter the selected date with
0 ~ 9
.
Start Time
:
Enter the selected starting time with
0 ~ 9
.
End Time
:
Enter the selected end of the recording with
0 ~ 9
.
Standby after timer
:
Set here whether the receiver should always be in standby after the timer
has expired or whether it should always remain switched on.
After finishing all settings, press
pq
to select
Save
and press
OK
.
NOTE:
The setting for
Standby after timer
applies to all timers.
7.3.5 Receiver Information
The menu contains information about the hardware and software versions of the receiver.
Amongst others you will find the serial number, model name, loader version and the CSSN number
of the receiver. The
Device-ID
(Gerätenummer) can be found on the bottom of the receiver, on the
packaging, in the
Client Status
menu or in the technical information (3x
INFO
). If you need to contact
our support or the ORF-support, please keep this information ready as it can help you and them to
handle your request.
7.4 Multimedia
In this menu you can decide whether to play movies, music or look at pictures.
Use the
pq
buttons to select the appropriate menu, and then press
ОK
to switch to one of the
submenus. In all multimedia menus, you can use the multimedia buttons as usual.
7.4.1 Movies
Only supported movies can be played in this menu. Use the
pq
t
u
and
P +/P-
buttons to
navigate and select, or press
OK
.
Signs and symbols:
Press
OK
on this icon to go back to the main directory from a selected
subdirectory.
