6
11.
pq
Menu Off: Change channel to next/previous. Menu On: Moves the
cursor up/down
12.
t
u
Menu Off: Decreases/increases the volume level. Menu On: Change
settings and navigation in menu
13.
OK
Menu Off: Displays the current channel list. Menu On: Opens
the highlighted setting or for confirmation. In Videotext mode:
Changing the transparency in 3 stages
14.
MENU
Opens the main menu; Within the menu switches to TV mode
15.
One step back from each menu or to cancel actions
16.
VOL+/VOL-
Increases/decreases the volume in all modes (with TV picture in BG/
Videotext)
17.
P+/P-
Scroll page wise in all lists
18.
LIST
Opens the satellite list in TV mode. In EPG and Timer mode it opens
the Timer list
19.
CH+/CH-
Channel up/down
20.
OPT
Opens the settings for TV format, aspect ratio and resolution
21.
TEXT
Opens the videotext if available
22.
SUB
Shows the list of DVB-subtitles if available
23.
Gives direct access to mails from your broadcaster
24.
2
In Multimedia mode: To pause the playback of a file
25.
RWD/FF
In Multimedia mode: Fast rewind/Fast forward
26.
4
No function
27.
u
In Multimedia mode: Starts the playback of a selected file (Preview)
28.
7 8
In Multimedia mode: During playback to jump to the previous/next
file
29.
3
In Multimedia mode: Stops the playback of the selected file
30.
RED
In menu for specific functions
31.
GREEN
In menu for specific functions
32.
YELLOW
In menu for specific functions
33.
BLUE
In menu for specific functions
* Depending on the System setting
Recent channel list
; allows you to call the channel list with up to 30 recently watched channels
2.5 Inserting the batteries
Fig. 4
NOTE:
The batteries must not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
2.6 Using the remote control
Fig. 5
NOTE:
The remote control will not operate if its path is blocked or affected by
bright/stroboscopic light.
3.0 CONNECTIONS
3.1 Connection via HDMI or SCART
Fig. 6
Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good
quality coaxial cable and suitable ‘F-connector' plugs.
Connect one end of a good quality HDMI cable to the HDMI connector of your receiver and the other
end to the HDMI input of your TV set.
Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
