6
2.
!
Mutes audio output of the receiver in every mode incl. videotext,
the symbol will not be shown within menu mode
3.
0~9
Channel selection or value input
4.
TV/R
Toggles between TV and RADIO mode
5.
No function
6.
FAV
Opens the favourite list selection if previously configured
7.
9
Opens the recently watched channel list or switches between the
two previously watched channels*
8.
AUDIO
Opens the list of audio languages
9.
INFO
Shows the actual channel information
10.
EPG
Shows the EPG (Electronic Programme Guide)
11.
pq
Menu Off: Change channel to next/previous. Menu On: Moves the
cursor up/down.
12.
t
u
Menu Off: Decreases/increases the volume level. Menu On: Change
settings and navigation in menu.
13.
OK
Menu Off: Displays the current channel list. Menu On: Opens
the highlighted setting or for confirmation. In Videotext mode:
Changing the transparency in 3 stages
14.
MENU
Opens the main menu; Within the menu switches to TV mode
15.
One step back from each menu or to cancel actions
16.
VOL+/VOL-
Increases/decreases the volume in all modes
17.
P+/P-
Scroll page wise in all lists
18.
LIST
Opens the satellite channel list in TV mode. In EPG and Timer mode
it opens the Timer list
19.
CH+/CH-
Channel up/down
20.
OPT
Opens the settings for TV format, aspect ratio and resolution
21.
TEXT
Opens the teletext if available
22.
SUB
Shows the list of subtitle languages if available
23.
Gives direct access to mails from your service provider
24.
2
In Multimedia mode: To pause the playback of a file
25.
RWD/FF
In Multimedia mode: Fast rewind/Fast forward
26.
4
No function
27.
u
In Multimedia mode: Starts the playback of a selected file
28.
78
In Multimedia mode: During playback to jump to the previous/next
file
29.
3
In Multimedia mode: Stops the playback of the selected file
30.
COLOUR BUTTONS
In menu for specific functions
* Depending on the
Recent channel list
setting within system settings menu
2.6 Inserting the batteries
Fig. 4
NOTE:
The batteries must not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries.
2.7 Using the remote control
Fig. 5
NOTE:
The remote control will not operate if its path is blocked or affected by
bright/stroboscopic light.