VoIP Business Phone Administrator Manual
Copyright © 2005 THOMSON
-All rights reserved
- Page 20
2.7
Muting a Call
The following key is used:
MUTE
[MUTE / Re-MUTE a Call]
- During a call, you can press
the
[MUTE]
key to prevent the calling party from hearing
what you or someone else in the room is saying.
- To disable this function, press the
[MUTE]
key again.
- The corresponding LCD screen messages are as follows:
LCD Screen
Description
Microphone Mute:
Active
When pressing the
[MUTE]
key on the phone, the voice
is muted and not to sent to the party. “Active” message is
displayed on the screen for one second. The mute LED is
on.
Microphone Mute:
Inactive
When the
[MUTE]
key is pressed again, the voice is
recovered. “Inactive” message is shown on the screen for
one second. The mute LED is off.
2.8
Holding a Call or Handling Multi-lines
The following keys are used:
HOLD MULTILINE
[Hold a Call/Switch between 2 lines]
While in a call, you can press the
[HOLD]
key to put the current call on hold.
a)
To return to the call, press the
[HOLD]
key again.
LCD Screen
Description
Dialing: HOLD
Press the [
HOLD
] key during a call and the LCD screen
will display “Hold”.
Press the [
HOLD
] key again, and the phone will retrieve the
first call.
b)
Place a second call
-
During the call if you want to switch between Call#1 and Call#2 use the
[Multiline]
key.
-
During a call with 2 lines, Call#1 in hold and Call#2 in communication, if
Call#2 off-hook, press the
[Multiline]
key to retrieve Call#1.
- Page 20 -
Содержание ST2020
Страница 1: ...Administrator Manual ...
